How to install leather stamp into soldering iron?

In the following; I will show you how to install our custom made leather stamp on the soldering iron to be an electric branding iron for leather.

Items and Tools Needed

You will need following items and tools for the branding iron;

  • screwdriver
  • soldering iron (4mm / 5mm / 6mm tip size)
  • leather stamp (4mm / 5mm / 6mm screw); screw size must be matched with the soldering iron tip size

Branding Iron Installation Guide

  1. Take out the screw
  2. Remove the original tip in the soldering iron
  3. install_leather_stamp1

  4. Install the screw to the leather stamp.
  5. Insert the screwed leather stamp into the soldering iron
  6. install_leather_stamp2

  7. Drive the screw back to soldering.
  8. install_leather_stamp3

  9. Make sure the leather stamp is installed firmly on the soldering iron before connecting to the socket.

Should you have any queries, please do not hesitate to contact our operation team on


Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s